Seven Bridges Walk 2018
Sydney Habour Bridge, Anzac Bridge, Pyrmont Bridge, Iron Cove Bridge, Fig Tree Bridge, Gladesville Bridge & Tarban Creek Bridge
Over 12,000 people will walk over Sydney’s 7 iconic bridges along a 27km course using existing walkways. Free shuttle buses will also run around the course in both directions.
Participants will cross the following seven bridges:
- Sydney Harbour Bridge
- Pyrmont Bridge
- Anzac Bridge
- Iron Cove Bridge
- Gladesville Bridge
- Tarban Creek Bridge
- Fig Tree Bridge
Participants can start the course at any of the six event villages including:
- Milsons Point Village - Burton St, corner of Alfred St and Burton St
- Pyrmont Village - Pyrmont Bay Park, Pirrama Rd, opposite The Star
- Rozelle Village - King George Park, Manning St, near Rozelle Hospital
- Hunters Hill Village – 1st Hunters Hill Scouts Hall, Durham St, near the Church St overpass on Burns Bay Rd
- Lane Cove Village - Blaxlands Corner - Central Park, William Edward St and Kenneth St
- Wollstonecraft Village - Brennan Park, Hazelbank St and King St
Milsons Point and Wollstonecraft villages are easily accessible from stations on the T1 North Shore Line. The remaining villages are best accessed by bus.
- Milsons Point Village, on Burton Street at the corner of Alfred Street and Burton Street, is a short walk from Milsons Point Station.
- Wollstonecraft Village, at Brennan Park on Hazelbank Street and King Street, is a short walk from Waverton Station.
Trackwork is taking place from 02:00 Saturday 27 October through to 02:00 Monday 29 October and may affect how you travel to and from the event on the following lines:
- T2 Inner West & Leppington line: from 08:30 until 12:30 on Saturday 27 October, buses will replace the all-stations trains between Central and Ashfield.
- T3 Bankstown Line: Buses replace trains between Lidcombe and Bankstown.
- Central Coast & Newcastle Line: Buses replace trains between Wyong and Hornsby
To note: As of Sunday 30 September, the Epping to Chatswood rail line has temporarily closed for upgrades for around 7 months before Sydney Metro Northwest services begin in 2019. The new high-frequency bus service, Station Link, will replace trains between Epping and Chatswood. For more information on Station Link, visit transportnsw.info.
Trackwork is carried out on an ongoing basis to maintain the safety, reliability, and efficiency of the Sydney Trains network. Trackwork may affect how you travel so allow plenty of extra travel time and plan ahead. Check travel alerts or use the Trip Planner
Free event shuttle buses will run around the course in both directions to help participants connect between villages. Just show your Event Guide when boarding services. Please note: if you’ve taken your dog on the walk with you, you won’t be able to bring your pet on board buses (assistance animals excepted).
Shuttle buses will start running from Milsons Point at 08:30, making their way around the course in both clockwise and anticlockwise directions. Last service will leave Milsons Point at 16:30.
Buses are expected to reach each bus stop approximately every 20 minutes from 08:30 until 13:00 and then every 10 minutes until 16:30.
Bus stop locations
- Milsons point: Alfred St South outside Milsons Point station
- Wollstonecraft: King St opposite Brennan Park
- Greenwich: River Rd opposite Greenwich Hospital
- Lane Cove West: River Rd, near William Edward St
- Linley Point: Burns Bay Rd opposite View St
- Hunters Hill: Burns Bay Rd near the Church St on/off-ramp
- Drummoyne: Victoria Rd near Lyons Rd opposite the Drummoyne Post Office
- Rozelle: Victoria Rd near Toelle St / Terry St
- Pyrmont: Pirrama Rd, outside The Star
Visit the Cancer Council 7 Bridges Walk event course map for village locations and bus stops.
The Rozelle, Hunters Hill and Lane Cove Villages are best accessible by bus. Use the Trip Planner to find a bus service to get you to your chosen starting point.
For bus service disruption information check travel alerts.
Sydney Ferries are a great way to get around the city, but services are very popular and may reach capacity, especially on weekends. Plan your trip ahead and allow plenty of extra travel time or consider the alternative transport options available.
Milsons Point and Pyrmont villages are easily accessible by ferry with wharves in short walking distance of the village sites. Remaining villages are best accessed by train or bus.
The best way to get to the Pyrmont village is by bus as Light rail services will be replaced by buses due to trackwork.
From 00:30, Saturday 27 October through until 06:00, Monday 29 October, buses will replace light rail services between Central and Dulwich Hill in both directions to allow for essential trackwork. For more information visit transportnsw.info.
Due to access constraints, buses are unable to safely stop or pick up at Capitol Square, Exhibition Centre (running towards Dulwich Hill) and Pyrmont Bay light rail stops. Customers needing to access these stops will need to do so by foot, the nearest stops are within short walking distance. For more details, see trackwork service alerts.
There are no full road closures in place along the course route so participants should take extra care, especially when crossing major roads.
A lane closure will be in place from 07:30 to 16:00 in Lane Cove on River Road eastbound from the Lane Cove Country Club to Greenwich Hospital to accommodate additional pedestrians on the footpath.
Drivers should also exercise caution and keep an eye out for walkers, as there will larger groups of pedestrians walking along footpaths on key roads.
Standard parking conditions apply in areas around each respective Village so check signs carefully.
The best way to get to and from the event is on transport as all villages are easily accessible by public transport.
Accessible trips are shown in the Trip Planner with the wheelchair icon. You can select "accessible services only" in the Options to ensure you only see accessible services. Only trip plans with accessible train platforms, ferry wharves and buses will be presented. See accessible travel or download a transport app (select the "Accessibility" filter).